Manual
7
4.3
Remote control
Button
Function
ZERO
Zeroing
Note: Use this function, if the scale is unloaded, but the display shows
a reading unequal “0”.
In settings: Increase selected digit
TARE
Activate tare function
In setting: go to next digit
SHIFT
Activate further functions in combination with other buttons (see
chapter 5)
In settings: confirm input
CLR (clear)
Deactivate accumulation function / delete total value
In settings: Decrease selected digit
ACCU (accumulation)
Activate accumulation function
F1
Adjust display brightness
F2
No function
HOLD
Activate/deactivate hold function
OFF
Shut the scale down
4.4
Battery
The crane scale comes with a usual 6 V / 7 Ah lead-acid battery, which can be replaced if it breaks down.
When fully loaded, the crane scale can be operated for ca. 50 hours.
If the display of the scale begins to blink, it means that the battery voltage is low. In this case, please
recharge the battery. If the battery is not recharged, the scale automatically shuts down after 1-2 hours.
If this happens, recharge the battery before the next usage.
To charge the battery, use the charging adaptor (9 V DC / 1000 mA), which is included in the package.
Turn the crane scale off and plug in the charging adaptor. The charging indication glows orange during
charging. If the battery is fully loaded, the charging indication turns green.
If the battery voltage is low, the battery should be charged for at least 8 hours. An integrated overcharge
protection prevents the battery from taking damage, if it is connected to the adaptor for too long.
