15
Chapter 2: Motherboard Installation
Expansion Slots
This motherboard has one AGP, CNR and two 32-bit PCI slots.
Follow the steps below to install an AGP/CNR/PCI expansion card.
1.
Locate the AGP, CNR or PCI slots on the motherboard.
2.
Remove the blanking plate of the slot from the system chassis.
3.
Install the edge connector of the expansion card into the slot. Ensure
the edge connector is correctly seated in the slot.
4.
Secure the metal bracket of the card to the system chassis with a
screw.
8X AGP Slot
You can install a graphics adapter that supports the 8x AGP specification and
has a 8X AGP edge connector in the AGP slot.
CNR Slot
You can install the CNR (Communications and Networking Riser) cards in this
slot, including LAN, Modem and Audio functions.
PCI Slots
You can install the 32-bit PCI interface expansion cards in the slots.
PCI2
CNR1
AGP1
PCI1
