Initial Display Mode (BIOS)
This option specifies the initial display mode when the system
boots.
Display Mode at Add-On ROM Init (Force BIOS)
This option allows OEM logo to show during boot-up.
Floppy Access Control (Read-Write)
This option specifies the read/write access that is set when booting
from a floppy drive.
Hard Disk Access Control (Read-Write)
This option specifies the read/write access that is set when booting
from a hard disk drive.
S.M.A.R.T for Hard Disks (Disabled)
Set this option to Enabled to permit the BIOS to use the SMART
(System Management and Reporting Technologies) protocol for
reporting server system information over a network. Enabling this
feature allows you to back up your data when your hard disk is
about to fail. If a password has been set for the supervisor, this
item will not be visible for the user.
BootUp Num-Lock (On)
Set this option to Off to turn the Num Lock key off when the
computer is booted you can use the arrow keys in both the numeric
keypad and the keyboard.
Floppy Drive Seek (Disabled)
When enabled, the BIOS will attempt to initialize the floppy drive.
If it cannot detect one, it will flash an error message. When set to
disabled, the BIOS will skip the floppy drive check which can
speed up the booting process by several seconds.
PS/2 Mouse Support (Enabled)
Set this option to Enabled to enable the BIOS support for a PS/2-
type mouse. The BIOS will allocate IRQ12 for the PS/2 mouse.
23
