manualshive.com logo in svg

PCchips M848ALU, Manual

Share
Download
PCchips M848ALU Manual Download Page 40

 

 

PCI5 

PCI4 

AGP

PCI3 

PCI1 

PCI2 

 

CNR

 
Follow the steps below to install an AGP/CNR/PCI expansion card.  
1.  Locate the AGP or PCI slots on the mainboard. 
2.  Remove the slot cover for this slot from the system chassis. 
3.  Insert the expansion card edge connector into the slot and press 

it firmly down into it so that it is fully inserted. 

4.  Secure the expansion card bracket to the system chassis with a 

screw.  

 

PCI (Peripheral Components Interconnect) Slots 

PCI slots are used to install expansion cards that have the 32-bit 
PCI interface. 

 
AGP (Accelerated Graphics Port) Slot 

The AGP slot is used to install 3D graphics adapter that supports 
the 8x AGP card which is

 

also backward compatible with 4x AGP 

card. The slot is keyed to support only the latest 1.5-volt AGP 
cards. 
 

CNR (Communications Network Riser) Slots 

This slot is used to insert CNR cards with Modem and Audio 
functionality. 

Note:

  Before installing an add-on card, check the documentation for 

the card carefully. If the card is not Plug and Play, you may 
have to manually configure the card before installation. 

 

 

18

Summary of Contents for M848ALU

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands