PCchips M830LU, User Manual

Page: 6 / 41

Mainboard User’s Manual
Key Features
The key features of this mainboard include:
Socket-A Processor Support

Supports AMD Athlon XP/Athlon/Duron processors

Supports 266 MHz Front-Side Bus
Processors are automatically configured using firmware and a
synchronous Host/DRAM Clock Scheme.
Memory Support

Two 168-pin DIMM slots for SDRAM memory modules

Two 184-pin DIMM slots for DDR memory modules

Support SDRAM up to 133 MHz /DDR up to 266 MHz
memory bus

Maximum installed memory is 1GB
Notice : You can NOT use SDRAM and DDR simultaneously.
Expansion Slots

One AMR slot for a special audio/modem riser card

One AGP4X slot for AGP 2.0-compliant interface

Five 32-bit PCI slots for PCI 2.2-compliant bus interface
Note: Please be noted the PCI1 slot (next to the AGP
slot) can’t simultaneously work out with USB2.0
controller (VT6202). Therefore, you must disable
USB2.0 controller through BIOS setup before
using the PCI1.
Onboard IDE channels

Primary and Secondary PCI IDE channels

Support for PIO (programmable input/output) modes

Support for Multiword DMA modes

Support for Bus Mastering and Ultra DMA 33/66/ 100
modes
Power Supply and Power Management

ATX power supply connector
2