PCchips M748LMRT Manual Download

Page: 45 / 48

Chapter 4



Windows 95 (Chinese) – D:\USB\CUSBSUPP\
CUSBSUPP.EXE

Sound Driver

The Sound driver allows the system to generate optimal sound
effects.
This driver is available for:



DOS & Windows 3.x – D:\SOUND\Driver\8738AM\DOS-
W31\



Windows 95/98 – D:\SOUND\Driver\8738AM\W95-98\



Windows NT – D:\SOUND\ Driver\8738AM\\Nt40DRV\

There is also an Audio Rack application program available for:



Windows 95/98 - D:\SOUND\Gamut\Gamut98

Graphics Drivers and Software

Find the Graphics drivers and software here:



D:\VGA\M748LMRT\Win9x\SETUP.EXE

Fax/Modem Drivers and Software

Find the fax/modem drivers and software here:



D:\Modem\8738\Win9x



D:\Modem\SuperVoice\

Network Adapter Driver

Find the network adapter driver here:



D:\LAN\Davicom9102

BIOS Update Utility

The BIOS Update utility allows you to update the BIOS setup file
on your mainboard to a newer version. You can download the
latest version of the BIOS setup available for your mainboard from
the website.



D:\UTILITY\AMIFL815.EXE

PC-Cillin Software

The PC-Cillin software program provides anti-virus protection for
your system.

Summary of Contents for M748LMRT

















































Search results

Summary of Contents for M748LMRT

Reviews:

Related manuals for M748LMRT

Brands by name

Popular brands

PCchips M748LMRT, Manual

Search results

Summary of Contents for M748LMRT

Reviews:

Related manuals for M748LMRT

Brands by name

Popular brands