Chapter 2
Mainboard Installation
To install this mainboard into your system, follow the procedures
in this chapter:
Identify the mainboard components
Install the correct processor
Install one or more memory modules
Verify that any jumpers or switches are at the correct setting
Install the mainboard in the system chassis
Install any extension cables to the mainboard headers
Install any other devices and make the appropriate connections
to the mainboard headers.
Note:
1. Before installing the mainboard, you must ensure that the
Clear CMOS jumper JP5 is set to the Normal setting. See this
chapter for information locating JP5 and changing the jumper
setting.
2. While installing the mainboard into AT case with ATX
power, please make sure the AC power cord is unplugged before
the full system is installed completely. Otherwise, it may destroy
stuffs unpredictably, due to the power-on trigger event of power
management.
