PCchips M728 User Manual Download Page 37

Page: 37 / 42

M728LMR Mainboard User’s Manual

Note:

The correct path name for each software driver is provided,

where

identifies the CD-ROM drive letter – modify if necessary.

Bus Master IDE Driver

The IDE Bus Master Drivers allows the system to properly manage
the IDE channels on the mainboard. The driver is available for:



Win9x – D:\IDE\GFXPRO\Win9x\

AGP Driver

The AGP Driver allows the system to properly manage the AGP
slot on the mainboard. Find the driver here:



D:\VGA\Ali1641\

Audio Driver

The Sound driver allows the system to generate optimal sound
effects. Find the driver and audio applications here:



D:\SOUND\Driver\C-Media\



D:\SOUND\Gamut\

Fax/Modem Drivers and Software

Find the fax/modem drivers and software here:



D:\Modem\Driver\PCI\



D:\Modem\SuperVoice\ [Telecom management software]



D:\Modem\MediaRing Talk

Network Adapter Driver

Find the network adapter driver here:



D:\LAN\SiS900

USB Driver

The USB Driver allows the system to recognize the USB ports on
the mainboard. You need to install this driver if you are running
Windows 95. Windows 95 OSR2 does not require this driver.
This driver is available for:



Win95 – D:\USB\EUSBSUPP\USBSUPP.EXE



Win95 (Chinese) – D:\USB\CUSBSUPP\CUSBSUPP.EXE

Summary of Contents for M728











































Search results

Summary of Contents for M728

Reviews:

Related manuals for M728

Brands by name

Popular brands

PCchips M728, User Manual

Search results

Summary of Contents for M728

Reviews:

Related manuals for M728

Brands by name

Popular brands