BIOS Setup
27
Video Power
Down Mode
This option specifies the power conserving
state that the VESA VGA video subsystem
enters after the specified period of display
inactivity has expired.
Hard Disk Power
Down Mode
This option specifies the power conserving
state that the hard disk drive enters after the
specified period of hard drive inactivity has
expired.
Standby Time out
(Minute)
This option specified the length of system
inactivity while in Full power on state. When
this length of time expires, the computer
enters Standby power state.
Suspend Time out
(Minute)
This option specified the length of a period of
system inactivity while in Standby state.
When this length of time expires, the
computer enters Suspend power state.
Monitor Parallel
Port;
Monitor serial
Port;
Monitor Floppy;
Monitor VGA;
Monitor Audio;
Monitor Pri-HDD;
Monitor Sec-HDD
When set to
Yes
, these options enable event
monitoring on the specified hardware
interrupt request line and the computer is in a
power saving state, BIOS watches for activity
on the specified IRQ line. The computer
enters the full on power state if any activity
occurs.
Power Button
Override
Set this option to enable Power Button
function.
Power Button
Function
This option specifies the operation of Soft-Off
by the Power Button. Select ÒGreenÓ function
to enter ÒOn-SuspendÐOffÓ or select ÒSoft
OffÓ function to enter ÒOn-OffÓ operation
cycle.
