22
Chapter 4
Standard Setup
The WinBIOS Setup options described in this section
are displayed by choosing the Standard icon from the
Setup section on the WinBIOS Setup main menu. All
Standard Setup options are described in this section.
Pri Master
Pri Slave
Sec Master
Sec Slave
Choose these icons to configure the hard disk
drive named in the option. When you click on
an icon, the following parameters are listed:
Type, LBA/Large Mode, Block Mode, 32Bit
Mode, and PIO Mode. All parameters relate to
IDE drives except
Type
. Choose the
Type
parameter and select Auto BIOS automatically
detects the IDE drive parameters and displays
them. Choose on
LBA Mode
and choose
On
to
enable support for IDE drives with capacities
greater than 528MB. Click on
Blk Mode
and
choose On to support IDE drives that use Blk
Mode. Click on
32Bit Mode
and click on
On
to
support IDE drives that permit 32-bit accesses.
Date/Time
Select the Date/Time option to change the date
or time. The current date and time are
displayed. Enter new values through the
displayed window.
Floppy Drive
A; B
Choose the Floppy Drive A or B icon to specify
the floppy drive type. The settings are 360KB
5
1
/
4
", 1.2MB 5
1
/
4
", 720KB 3
1
/
2
", 1.44MB 3
1
/
2
",
or 2.88MB 3
1
/
2
".
