PCB 1408-02ADB, Installation And Operating Manual

Page: 6 / 16

Model Number
1408-02ADB
FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE
Revision: E
ECN #: 43840
Performance ENGLISH SI
Measurement Range(100 x 10^6 cycles) 50 klb 222 kN [5][6]
Sensitivity(± 10 %) 2.0 mV/V 2.0 mV/V [7][1]
Non-Linearity ≤ 0.05 % FS ≤ 0.05 % FS
Hysteresis ≤ 0.05 % FS ≤ 0.05 % FS
Non-Repeatability ≤ 0.02 %RO ≤ 0.02 %RO
Eccentric Load Sensitivity 0.1 %/in 0.1 %/25.4mm
Resonant Frequency 18 kHz 18 kHz
Side Load Sensitivity 0.1 %/in 0.1 %/25.4mm
Creep(in 20 minutes) 0.025 % 0.025 %
Static Error Band ≤ 0.05 % FS ≤ 0.05 % FS [5]
Environmental
Overload Limit 150 klb 667 kN
Load Limit(Side Force, F
X
or F
Y
) 50 klb 222 kN [3]
Load Limit (Bending Moment, M
X
or M
Y
) 50k in-lb 5649 Nm [3]
Load Limit (Axial Torque, M
Z
) 50k in-lb 5649 Nm [3]
Temperature Range(Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output(Maximum) ± 0.0008 %Reading/°F ± 0.0018 %Reading/°C [4]
Temperature Effect on Zero Balance(Maximum) ± 0.0008 %FS/°F ± 0.0018 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage(Recommended) 10 VDC 10 VDC [2]
Insulation Resistance >5k GOhm >5k GOhm
Zero Balance ≤ 1 %RO ≤ 1 %RO
Output Polarity +Tension +Tension
Physical
Size (Diameter x Height) 8.00 in x 4.50 in 203.20 mm x 114.30 mm [8]
Weight 54 lb 25.5 kg
Mounting Thread 1 3/4 - 12 UNF-3B No Metric Equivalent
Sensing Element Strain Gage Strain Gage
Mounting Torque 2600 in-lb 294 Nm
Deflection at Full Scale Capacity 0.001 in 0.025 mm
Electrical Connector PT02E-10-6P (2) PT02E-10-6P (2)
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
NOTES:
[1]Nominal.
[2]Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3]Singularly applied, i.e. no other extraneous loads.
[4]Over compensated operating temperature range.
[5]FS - Full Scale.
[6]Calibrated in tension and compression.
[7]RO - Rated Output.
[8]See Outline Drawing 49042 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A87 Pre-Tension Stud
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: ltinfo@pcbloadtorque.com
Web site:
http://www.pcbloadtorque.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: AP Engineer: PE Sales: RWM Approved: JSD Spec Number:
Date: 2/17/2015 Date: 2/17/2015 Date: 2/17/2015 Date: 2/17/2015
48233