Model Number
106B
ICP® PRESSURE SENSOR
Revision: AA
ECN #: 52524
P erfo rm an ce
EN G L ISH
SI
Measurement Range(for ±2.5V output)
8.3 psi
57.2 kPa
Sensitivity(± 15 %)
300 mV/psi
43.5 mV/kPa
Maximum Pressure(step)
200 psi
1,379 kPa
Maximum Pressure
2 kpsi
13,790 kPa
Resolution
0.0001 psi
0.00069 kPa
[1]
Resonant Frequency
≥ 60 kHz
≥ 60 kHz
Rise Time
≤ 9 µ sec
≤ 9 µ sec
Low Frequency Response(- 5 %)
0.5 Hz
0.5 Hz
Non-Linearity
≤ 1 % FS
≤ 1 % FS
[2]
En viro n m en tal
Acceleration Sensitivity
≤ 0.002 psi/g
≤ 0.0014 kPa/(m/s²)
Temperature Range(Operating)
-65 to +250 °F
-54 to +121 °C
Temperature Coefficient of Sensitivity
≤ 0.05 %/°F
≤ 0.09 %/°C
Maximum Flash Temperature
3,000 °F
1,649 °C
Maximum Shock
2,000 g pk
19,600 m/s² pk
Electrical
Output Polarity(Positive Pressure)
Positive
Positive
Discharge Time Constant(at room temp)
≥ 1 sec
≥ 1 sec
Excitation Voltage
12 to 30 VDC
12 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤ 100 Ohm
≤ 100 Ohm
Output Bias Voltage
3 to 8 VDC
3 to 8 VDC
P h ysical
Sensing Geometry
Compression
Compression
Sensing Element
Quartz
Quartz
Housing Material
304/304L Stainless Steel
304/304L Stainless Steel
Diaphragm
316L Stainless Steel
316L Stainless Steel
Sealing
Welded Hermetic
Welded Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Weight
0.63 oz
18.0 gm
[3]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
E
- Emralon coating
Coating
Emralon
Emralon
Electrical Isolation
10
8
Ohm
10
8
Ohm
Optional Accessory: Model 065A47 Seal ring 0.497 OD x 0.437 ID x 0.025 thk Acetal (3)
J
- Ground Isolated
[4]
Electrical Isolation(50 V)
10
8
Ohm
10
8
Ohm
T
- TEDS Capable of Digital Memory and
Communication Compliant with IEEE P1451.4
Output Bias Voltage
3.7 to 8.7 VDC
3.7 to 8.7 VDC
W
- Water Resistant Cable
[5]
Supplied Accessory: Model 060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex (1)
W M
- Water Resistant Cable
[5]
Supplied Accessory: Model 060A14 Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless steel
(1)
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Typical.
[2]Zero-based, least-squares, straight line method.
[3]See PCB Declaration of Conformance PS023 for details.
[4]Used with optional mounting adaptor.
[5]Clamp nut installed prior to cable attachment
Date: 02/01/2022
Date: 02/01/2022
Date: 02/01/2022
Date: 02/01/2022
106-2010-80
Entered: ND
Engineer: MJK
Sales: MV
Approved: RPF
Spec Number:
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
3425 Walden Avenue, Depew, NY 14043
SU P P L IED A C C ESSORIES:
Model 060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex (1)
Model 060A14 Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless steel (1)
Model 065A37 Seal ring 0.497 OD x 0.437 ID x 0.025 thk Brass (3)
