PCB Piezotronics J352C67, Installation And Operating Manual

Page: 15 / 17

Model Number
352C67
ICP® ACCELEROMETER
Revision: N
ECN #: 44362
Performance ENGLISH SI
Sensitivity(± 10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ± 50 g pk ± 491 m/s² pk
Frequency Range(± 5 %) 0.5 to 10,000 Hz 0.5 to 10,000 Hz
Frequency Range (± 10 %) 0.3 to 12,000 Hz 0.3 to 12,000 Hz
Frequency Range (± 3 dB) 0.2 to 20,000 Hz 0.2 to 20,000 Hz
Resonant Frequency ≥ 35 kHz ≥ 35 kHz
Phase Response(± 5 °)(at 70°F [21°C]) 2 to 6000 Hz 2 to 6000 Hz
Broadband Resolution(1 to 10,000 Hz) 0.00016 g rms 0.0015 m/s² rms [1]
Non-Linearity ≤ 1 % ≤ 1 % [3]
Transverse Sensitivity ≤ 5 % ≤ 5 % [4]
Environmental
Overload Limit(Shock) ± 5000 g pk ± 49,050 m/s² pk
Temperature Range(Operating) -65 to +200 °F -54 to +93 °C [2]
Temperature Response See Graph See Graph [1]
Base Strain Sensitivity <0.005 g/µ ε <0.05 (m/s²)/µ ε [1]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 300 Ohm ≤ 300 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.8 to 2.4 sec 0.8 to 2.4 sec
Settling Time(within 10% of bias) <10 sec <10 sec
Spectral Noise(1 Hz) 60 µg/ √ Hz
588 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (10 Hz) 16 µg/ √ Hz
157 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (100 Hz) 5 µg/ √ Hz
49 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (1 kHz) 1.5 µg/ √ Hz
14.7 (µm/sec
2
)/ √ Hz
[1]
Physical
Size (Height x Hex) 0.58 in x 9/32 in 14.7 mm x 9/32 in
Weight 0.070 oz 2.0 gm [1]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Plug 10-32 Coaxial Plug
Electrical Connection Position Top Top
Cable Length 10 ft 3 m
Cable Type 031 Twisted Pair 031 Twisted Pair
Mounting Thread 5-40 Male 5-40 Male
Mounting Torque 8 to 12 in-lb 90 to 135 N-cm
[5]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
A
- Adhesive Mount
[6]
Supplied Accessory : Model 080A90 Quick Bonding Gel (1) replaces Model 080A15
HT
- High temperature, extends normal operation temperatures
Frequency Range(5 %) 5 to 10,000 Hz 5 to 10,000 Hz
Frequency Range (10 %) 3 to 12,000 Hz 3 to 12,000 Hz
Frequency Range (3 dB) 2 to 20,000 Hz 2 to 20,000 Hz
Broadband Resolution(1 to 10,000 Hz) 0.0002 g rms 0.002 m/s² rms
Temperature Range(Operating) -65 to +250 °F -54 to +121 °C
Discharge Time Constant 0.08 to 0.24 sec 0.08 to 0.24 sec
Spectral Noise(1 Hz) 75 µg/ √ Hz
736 (µm/sec
2
)/ √ Hz
Spectral Noise (10 Hz) 25 µg/ √ Hz
245 (µm/sec
2
)/ √ Hz
J
- Ground Isolated
Frequency Range(5 %) 0.5 to 8000 Hz 0.5 to 8000 Hz
Frequency Range (10 %) 0.3 to 10,000 Hz 0.3 to 10,000 Hz
Frequency Range (3 dB) 0.2 to 16,000 Hz 0.2 to 16,000 Hz
Resonant Frequency ≥ 30 kHz ≥ 30 kHz
Electrical Isolation(Base)
>10
8
Ohm >10
8
Ohm
Size - Hex x Height 3/8 in x 0.64 in 3/8 in x 16.3 mm
Weight 0.1 oz 2.8 gm
M
- Metric Mount
Mounting Thread M3 x 0.50 Male M3 x 0.50 Male
Supplied Accessory : Model M080A15 Adhesive Mounting Base (1) replaces Model 080A15
W
- Water Resistant Cable
Electrical Connector Sealed Integral Cable Sealed Integral Cable
Electrical Connection Position Top Top
Cable Type 018 Coaxial 018 Coaxial
NOTES:
[1]Typical.
[2]200°F to 250°F data valid with HT option only.
[3]Zero-based, least-squares, straight line method.
[4]Transverse sensitivity is typically
≤ 3%.
[5]See PCB Declaration of Conformance PS135 for details.
[6]Mounting stud removed, adhesive mounting base not required.
SUPPLIED ACCESSORIES:
Model 080A109 Petro Wax (1)
Model 080A15 Adhesive Mounting Base (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point).
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
Entered: JM Engineer: NJF Sales: RWM Approved: NJF Spec Number:
Date: 6/29/2015 Date: 6/29/2015 Date: 6/29/2015 Date: 6/29/2015
8338