INDUSTRIAL MONITORING INSTRUMENTATION DIVISION
PAGE
4
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
Installation
Establish an easily accessible location for
installation.
Fiberglass rotary switch boxes include four
polyester mounting brackets and four stainless
steel attachment screws that are shipped loose to
facilitate enclosure mounting. There are
positioning indents on the back of the box in each
corner. Once the mounting brackets are
positioned properly, they should then be fastened
to the box with the provided screws. Hardware for
fastening the mounting brackets to the installation surface are to be
provided in the field.
Painted steel and stainless steel boxes include two factory-installed
mounting brackets on the top and bottom of the box. Hardware for
fastening the mounting brackets to the installation surface are to be provided in the field.
Box may or may not have shipped from factory with factory-installed connection ports. If box did ship from factory
with factory-installed connection ports, ensure that box is mounted with connection ports facing down. The
factory-installed connection port options are listed in the table below.
(6)
PGME07
Cord
Grips
(12)
PGME07
Cord
Grips
(1)
PGME29
Cord
Grip
(2)
PGME29
Cord
Grips
(6)
PGME07
Cord
Grips &
(1)
PGME29
Cord
Grip
(6)
PGME07
Cord
Grips &
(1)
PGME29
Cord
Grip
(1) 1.5”
Conduit
Fitting
(2) 1.5”
Conduit
Fittings
/691010
/691020
/691011
/691071
/691004
/691000
/691013
/691026
(PS)(SS)691C41(T)
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
(PS)(SS)691C42(T)
No
Yes
Yes
Yes
No
Yes
Yes
Yes
