PCB Piezotronics IMI SENSORS 686B02, Installation And Operating Manual

Page: 42 / 43

Model Number
686B02
VIBRATION SWITCH
Revision: B
ECN #: 39883
[2]
Performance ENGLISH SI
Alarm Threshold(± 10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms
[1]
Frequency Range(± 3 dB) 420 to 60 kcpm 7 to 1000 Hz
Hysteresis(% < Alarm Threshold) 3; 6; or 10 % 3; 6; or 10 %
[1]
Residual Vibration Level(Reference) Dependent or Independent Dependent or Independent
[1]
Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 %
[1]
MAVT(Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled
[1]
Transverse Sensitivity <7 % <7 %
Power On Delay(± 1 sec) 3 or 20 sec 3 or 20 sec
[1]
Startup Delay(± 1 sec or 1 min)(Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min
[1]
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked
[1]
Startup Delay (Active) Enabled or Disabled Enabled or Disabled
[1]
Operational Delay(± 1 sec) 1 to 60 sec 1 to 60 sec
[1]
Relay(Type)
SPST, Form A or B
MOSFET
SPST, Form A or B
MOSFET
Relay (Latching) Latching / Non-Latching Latching / Non-Latching
[1]
Relay (Contacts) Normally Open / Closed Normally Open / Closed
[1]
Environmental
Temperature Range(Operating) -40 to 185 °F -40 to 85 °C
Temperature Range (Storage) -40 to 257 °F -40 to 125 °C
Overload Limit(Shock) 5000 g pk 49,050 m/s² pk
Enclosure Rating IP68 IP68
Electrical
Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz
Current Rating(Relay Closed) 500 mA 500 mA
Leak Current(Relay Open)
≤
1 mA
≤
1 mA
Electrical Isolation(Case)
>10
8
Ohm >10
8
Ohm
Physical
Size (Hex x Height) 1.25 in x 2.6 in 1.25 in x 66 mm
Weight 5.2 oz 148 gm
Mounting Torque 3 to 5 ft-lb 4 to 7 Nm
Mounting Thread 1/4-28 Female 1/4-28 Female
Sensing Element(Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without
notice.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
EX
- Hazardous Area Approval- contact factory for specific approvals
Current Rating(Relay Closed) 100 mA 100 mA
Hazardous Area Approval
Cl I, Div 2, Groups A, B, C, D;
Ex nL IICT3, AEx nA IICT3
Cl I, Div 2, Groups A, B, C, D;
Ex nL IICT3, AEx nA IICT3
Power Required 10 to 30 VDC 10 to 30 VDC
Relay(Capacity) 10 to 30 VDC, 100 mA 10 to 30 VDC, 100 mA
M
- Metric Mount
Supplied Accessory : Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1)
NOTES:
[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.
SUPPLIED ACCESSORIES:
Model 081A41 Mounting stud 1/4-28 socket head set screw brass tip stainless steel 5/8" long
(1)
Entered: AP Engineer: do Sales: EGY Approved: BAM Spec Number:
Date: 9/4/2012 Date: 9/4/2012 Date: 9/4/2012 Date: 9/4/2012
43156
3425 Walden Avenue, Depew, NY 14043
Phone: 800-959-4464
Fax: 716-684-3823
E-Mail: imi@pcb.com