PCB Piezotronics IMI SENSORS 683A101003, Installation And Operating Manual

Page: 29 / 30

Model Number
683A 100000
INDICATOR / ALARM (FOR ICP® SENSORS)
Revision: B
ECN #: 49891
P erfo rm an ce EN G L ISH SI
Sensor Input Type(s) ICP® ICP®
Input Signal 100 mV/g 100 mV/(m/s²)
Frequency Response(± 3 dB) 3 to 10k Hz 3 to 10k Hz
Channels 1 1
Accuracy ± 2 % FS ± 2 % FS
Measurement Range(Acceleration) 5 g 5 g [1][2]
Measurement Range (Acceleration) 10 g 10 g [1][2]
Measurement Range (Acceleration) 20 g 20 g [1][2]
Measurement Range (Velocity) 0.50 in/sec 0.50 in/sec [1][2]
Measurement Range (Velocity) 1.00 in/sec 1.00 in/sec [1][2]
Measurement Range (Velocity) 2.00 in/sec 2.00 in/sec [1][2]
Measurement Range (Displacement) 25.0 mil pk - pk 25.0 mil pk - pk [1][2]
Measurement Range (Displacement) 50.0 mil pk - pk 50.0 mil pk - pk [1][2]
Measurement Range (Displacement) 100.0 mil pk - pk 100.0 mil pk - pk [1][2]
Relay Type(Alert) 5A Form A 230 VAC/30 VDC 5A Form A 230 VAC/30 VDC
Relay Type (Alarm) 5A Form A 230 VAC/30 VDC 5A Form A 230 VAC/30 VDC
Delay 0 to 9,999 sec 0 to 9,999 sec
En viro n m en tal
Temperature Coefficient of Sensitivity 56 ppm/°F 100 ppm/°C
Warm Up <2 minutes <2 minutes
Temperature Range(Operating) 32 to 140 °F 0 to 60 °C
Temperature Range (Storage) -4 to 158 °F -20 to 70 °C
Humidity Range(Non-Condensing) <95 % <95 %
Electrical
Power Required(Auto Sensing) 85-265 VAC/95-370 VDC 85-265 VAC/95-370 VDC
Current Consumption(Typical) 2.5 W 2.5 W
Current Consumption (Max) 3.5 W 3.5 W
Excitation Voltage(± 1 VDC) 24 VDC 24 VDC
Constant Current Excitation(± 1 mA) 4 mA 4 mA
P h ysical
Size - Depth 4.61 in 117 mm
Size - Width 3.45 in 87.4 mm
Size - Height 1.61 in 40.8 mm
Housing Material Polycarbonate Polycarbonate
Weight 8.5 oz 241 gm
Din Rail Mount 1/8 in 3 mm
Electrical Connector Removable Screw Terminals Removable Screw Terminals
BEZEL 3.78 x 1.89 in 96 x 48 mm
Depth Behind BEZEL 4.61 in 117 mm
Depth Behind BEZEL (Rt. Angle Conn.) 5.08 in 129 mm
Depth Behind BEZEL (Straight Conn.) 5.40 in 137 mm
Accessories None None
[3]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
N OTES:
[1]Factory set, 1.0 in/sec peak
[2]Internal Dip switch selectable
[3]See PCB Declaration of Conformance PS050 for details.
Date: 09/03/2019 Date: 09/03/2019 Date: 09/03/2019 Date: 09/03/2019 19278
Entered: lnk Engineer: JB Sales: MC Approved: NJF Spec Number:
P h o n e: 800-959-4464
F ax: 716-684-3823
E-M ail: im i@ p cb .co m
3425 Walden Avenue, Depew, NY 14043