Model Number
351B04
ICP® ACCELEROMETER
Revision: G
ECN #: 48061
Performance
ENGLISH
SI
Sensitivity(± 10 %)
10 mV/g
1.02 mV/(m/s²)
Measurement Range
± 150 g pk
± 1472 m/s² pk
Frequency Range(± 5 %)
1 to 6000 Hz
1 to 6000 Hz
Frequency Range
(± 10 %)
0.7 to 9000 Hz
0.7 to 9000 Hz
Frequency Range
(± 3 dB)
0.35 to 15,000 Hz
0.35 to 15,000 Hz
Resonant Frequency
≥
35 kHz
≥
35 kHz
Broadband Resolution
0.01 g rms
0.1 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[2]
Transverse Sensitivity
≤
5 %
≤
5 %
[3]
Environmental
Overload Limit
± 5000 g pk
± 49,050 m/s² pk
Temperature Range
-320 to +250 °F
-196 to +121 °C
Temperature Response
See Graph
See Graph
[1]
Base Strain Sensitivity
<0.0005 g/µ
ε
<0.005 (m/s²)/µ
ε
[1]
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤
200 Ohm
≤
200 Ohm
Output Bias Voltage
3 to 10 VDC
3 to 10 VDC
Discharge Time Constant
0.5 to 1.5 sec
0.5 to 1.5 sec
Spectral Noise(10 Hz)
220 µg/
√
Hz
2156 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
62 µg/
√
Hz
607 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
16 µg/
√
Hz
156 (µm/sec
2
)/
√
Hz
[1]
Physical
Weight
0.33 oz
9.4 gm
[1]
Sensing Element
Quartz
Quartz
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Welded Hermetic
Welded Hermetic
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Top
Top
Mounting Thread
10-32 Female
10-32 Female
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
J
- Ground Isolated
Frequency Range(5 %)
5 Hz
5 Hz
Frequency Range
(10 %)
8 Hz
8 Hz
Resonant Frequency
≥
22 kHz
≥
22 kHz
Electrical Isolation(Base)
>10
8
Ohm
>10
8
Ohm
Size - Hex x Height
0.50 in x 1.24 in
12.7 mm x 31.5 mm
NOTES:
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Transverse sensitivity is typically
≤
3%.
[4] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 081B05 Mounting Stud (10-32 to 10-32) (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1)
Model M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
Entered: LK
Engineer: LM
Sales: WDC
Approved: JJB
Spec Number:
Date: 4/19/2018
Date: 4/19/2018
Date: 4/19/2018
Date: 4/19/2018
351-2040-80
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
