PCB Piezotronics EX682M71, Operating Manual

Page: 35 / 38

The Model codes suffixes are as follows:
X = family type: A – M
YYYY = different filtering, gain, frequency response: 0-9999.
Class I, Division 2, Groups A, B, C and D:
- Model EX682XYYYY Differential Charge Amplifier, input rated 28 Vdc max, 20mA max; non-incendive with
entity parameters at Power terminals (VDC, COM): Vmax (Ui) ≤ 28V, Imax (Ii) ≤ 100mA, Pi ≤ 0.7 W, Li = 10.8
µH, Ci = 0 ƞF; Sensor terminals (-SIG, +SIG): Voc (Uo) ≤ 28V, Isc (Io) ≤ 60 mA, Po ≤ 0.42W, Lo ≤ 8 mH, Co ≤
83 ƞF. Refer to installation Dwg. 56543; Temperature Code T4 at maximum ambient 85
⁰
C.
Notes:
1. The Model EX682XYYYY shall be installed in a suitable enclosure acceptable to CSA or the local authority
having jurisdiction.
2. The Model EX682XYYYY shall only be connected to non-incendive Certified equipment per installation
drawing.
The Model codes suffixes are as follows:
X = family type: A – M
YYYY = different filtering, gain, frequency response: 0-9999.
APPLICABLE REQUIREMENTS
CAN/CSA-C22.2 No. 0-2010 - General Requirements – Canadian Electrical Code, Part II
C22.2 No. 142-M1987 (R2009) - Process Control Equipment
CAN/CSA-C22.2 No.157-92 (R2012) - Intrinsically Safe and Non-Incendive Equipment for Use in
Hazardous Locations
C22.2 No. 213-M1987 (R2008) - Non-Incendive Electrical Equipment for Use in Class I, Division 2
Hazardous Locations
UL 913-5
Th
Edition - Intrinsically Safe Apparatus and Associated Apparatus for Use in
Class I, II and III, Division 1, Hazardous Locations
UL 916-4
Th
Edition - Energy Management Equipment
ANSI/ISA 12.12.01-2012 - Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified)
Locations
ITEM # 57701
REV. A
ECO 46172