Model Number
480M122
BATTERY-POWERED SIGNAL CONDITIONER
Revision: F
ECN #: 45339
Performance
ENGLISH
SI
Channels
1
1
Frequency Range(-5 %)(x1, x10 Gain)
0.15 to 100,000 Hz
0.15 to 100,000 Hz
[6]
Frequency Range
(-10 %)(x100 Gain)
0.15 to 50,000 Hz
0.15 to 50,000 Hz
[7]
Voltage Gain(± 2 %)
1:1
1:1
Voltage Gain
(± 2 %)
1:10
1:10
Voltage Gain
(± 2 %)
1:100
1:100
Fault/Bias Monitor/Meter(± 1 V)(midscale)
13 VDC
13 VDC
Environmental
Temperature Range
32 to 120 °F
0 to 50 °C
Electrical
Excitation Voltage(To Sensor)
25 to 29 VDC
25 to 29 VDC
[1]
Constant Current Excitation(To Sensor)
3.4 to 4.6 mA
3.4 to 4.6 mA
[2]
Discharge Time Constant
>7 sec
>7 sec
[3][4]
DC Offset(Maximum)
<30 mV
<30 mV
[3]
Spectral Noise(1 Hz)(Gain 1)
.25 µV/
√
Hz
-132 dB
Spectral Noise
(10 Hz)(Gain 1)
.07 µV/
√
Hz
-143 dB
Spectral Noise
(100 Hz)(Gain 1)
.05 µV/
√
Hz
-146 dB
Spectral Noise
(1 kHz)(Gain 1)
.04 µV/
√
Hz
-148 dB
Spectral Noise
(10 kHz)(Gain 1)
.03 µV/
√
Hz
-150 dB
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x1)
3.25 µV rms
-110 dB/rms
Spectral Noise(1 Hz)(Gain 10)
2.2 µV/
√
Hz
-113 dB
Spectral Noise
(10 Hz)(Gain 10)
2.0 µV/
√
Hz
-114 dB
Spectral Noise
(100 Hz)(Gain 10)
1.1 µV/
√
Hz
-119 dB
Spectral Noise
(1 kHz)(Gain 10)
.55 µV/
√
Hz
-125 dB
Spectral Noise
(10 kHz)(Gain 10)
.3 µV/
√
Hz
-130 dB
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x10)
49 µV/rms
-86 dB/rms
Spectral Noise(1 Hz)(Gain 100)
20 µV/
√
Hz
-94 dB
Spectral Noise
(10 Hz)(Gain 100)
19 µV/
√
Hz
-94 dB
Spectral Noise
(100 Hz)(Gain 100)
12 µV/
√
Hz
-98 dB
Spectral Noise
(1 kHz)(Gain 100)
5.5 µV/
√
Hz
-105 dB
Spectral Noise
(10 kHz)(Gain 100)
2 µV/
√
Hz
-114 dB
Broadband Electrical Noise(1 to 10,000 Hz)(Gain x100)
569 µV/rms
-65 dB/rms
Power Required(Standard)
Internal Battery
Internal Battery
Internal Battery(Type)
9V
9V
Battery Life(Standard Alkaline)
50 hours
50 hours
Power Required(Alternate)
DC power
DC power
DC Power
15 mA
15 mA
[5]
Internal Battery(Quantity)
3
3
DC Power
18 to 30 VDC
18 to 30 VDC
[5][1]
Physical
Electrical Connector(Input, sensor)
BNC Jack
BNC Jack
Electrical Connector
(Output, scope)
BNC Jack
BNC Jack
Electrical Connector
(External Power, DC)
3.5 mm Diameter Miniature
Jack
3.5 mm Diameter Miniature
Jack
Electrical Connector
(Battery Charger)
#722 Switchcraft Jack
#722 Switchcraft Jack
Size (Depth x Height x Width)
2.4 in x 4.0 in x 2.9 in
6.1 cm x 10 cm x 7.4 cm
Weight(Including Batteries)
0.7 lb
0.3 kg
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
NOTES:
[1]Excitation voltage to sensor limited by optional DC power voltage.
[2]Through internal current limiting regulator.
[3]With 1M ohm load.
[4]Un-buffered output, read out device input impedance affects discharge time constant and low
frequency response of unit.
[5]Provided by optional external DC power supply.
[6]Low frequency response specified into 1M ohm load.
[7]After Serial Number 24699, previously HFR was 100kHz.
[8]See PCB Declaration of Conformance PS024 for details.
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
[8]
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: LK
Engineer: CPH
Sales: ML
Approved: JWH
Spec Number:
Date: 5/23/2016
Date: 5/23/2016
Date: 5/23/2016
Date: 5/23/2016
8786
Summary of Contents for 480C02
Page 18: ......
