Model Number
350B01
SHEAR ICP® SHOCK ACCELEROMETER
Revision: G
ECN #: 51341
P erfo rm an ce
EN G L ISH
SI
Sensitivity(± 30 %)
0.05 mV/g
0.005 mV/(m/s²)
Measurement Range
± 100,000 g pk
± 981,000 m/s² pk
Frequency Range(± 1 dB)
4 to 10,000 Hz
4 to 10,000 Hz
Frequency Range
(- 3 dB)
2 to 25,000 Hz
2 to 25,000 Hz
[1]
Electrical Filter Corner Frequency(- 3 dB)
17 kHz
17 kHz
[2][3]
Mechanical Filter Resonant Frequency
35 kHz
35 kHz
[2][4]
Resonant Frequency
≥ 100 kHz
≥ 100 kHz
Broadband Resolution(1 to 10,000 Hz)
0.5 g rms
4.9 m/s² rms
[2]
Non-Linearity(per 10,000 g (98,100 m/s²))
≤ 2.5 %
≤ 2.5 %
Transverse Sensitivity
≤ 7 %
≤ 7 %
En viro n m en tal
Overload Limit(Shock)
± 150,000 g pk
± 1,471,500 m/s² pk
Temperature Range(Operating)
-10 to +150 °F
-23 to +66 °C
Temperature Range
(Storage)
-40 to +200 °F
-40 to +93 °C
Temperature Response
See Graph
See Graph
[2][5]
Electrical
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Constant Current Excitation
2 to 20 mA
2 to 20 mA
Output Impedance
≤ 200 Ohm
≤ 200 Ohm
Output Bias Voltage
8 to 14 VDC
8 to 14 VDC
Discharge Time Constant
0.10 sec
0.10 sec
[2]
Settling Time(within 10% of bias)
< 1 sec
< 1 sec
Electrical Isolation(Case)
> 1,000,000 Ohm
> 1,000,000 Ohm
P h ysical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Shear
Shear
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Hex x Height)
0.375 in x 1.04 in
9.5 mm x 26.5 mm
Weight(without cable)
0.20 oz
5.5 gm
[2]
Electrical Connector
Integral Cable
Integral Cable
Cable Length
10 ft
3.05 m
Cable Type
031 Twisted Pair
031 Twisted Pair
Mounting Thread
1/4-28 Male
1/4-28 Male
[6]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
M
- Metric Mount
Mounting Thread
M6 x 0.75 Male
M6 x 0.75 Male
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Typical corner frequency for coupled electrical and mechanical filters.
[2]Typical.
[3]Electrical filter is a second order filter.
[4]Amplitude at resonance is +9 dB.
[5]Test conducted on shaker at 100Hz.
[6]See PCB Declaration of Conformance PS135 for details.
Date: 12/17/2020
Date: 12/17/2020
Date: 12/17/2020
Date: 12/17/2020
52263
Entered: LK
Engineer: AJA
Sales: RWM
Approved: BAM
Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: [email protected]
SU P P L IED A C C ESSORIES:
Model ACS-14 High G shock accelerometer calibration using Hopkinson bar. (1)
Model ACS-22 NIST Traceable frequency response (100Hz to ±1 dB point) (1)
