PCB Piezotronics 339A30/NC, Installation And Operating Manual

Page: 15 / 16

Model Number
339A30
TRIAXIAL ICP® ACCELEROMETER
Revision: E
ECN #: 46623
Performance ENGLISH SI
Sensitivity(± 10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ± 500 g pk ± 4905 m/s² pk
Frequency Range(± 5 %) 2 to 8000 Hz 2 to 8000 Hz
Resonant Frequency(x or y axis) ≥ 25 kHz ≥ 25 kHz
Resonant Frequency (z axis) ≥ 55 kHz ≥ 55 kHz
Filter Type(single pole) Low Pass Low Pass
Electrical Filter Roll-off 6 dB/octave 6 dB/octave
Electrical Filter Corner Frequency >14 kHz >14 kHz
Broadband Resolution(1 to 10,000 Hz) 0.008 g rms 0.078 m/s² rms
[1]
Non-Linearity ≤ 0.5 % ≤ 0.5 %
Transverse Sensitivity ≤ 5 % ≤ 5 %
Environmental
Overload Limit(Shock) ± 5000 g pk ± 49,050 m/s² pk
Temperature Range(Operating) -65 to +325 °F -54 to +163 °C
Temperature Response See Graph See Graph
[1]
Temperature Coefficient of Sensitivity ≤ 0.011 %/°F ≤ 0.020 %/°C
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤ 200 Ohm ≤ 200 Ohm
Output Bias Voltage(Room Temperature) 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.6 to 2 sec 0.6 to 2 sec
Settling Time(within 10% of bias) <3 sec <3 sec
Spectral Noise(1 Hz) 1700 µg/ √ Hz
16,660 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (10 Hz) 500 µg/ √ Hz
4900 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (100 Hz) 200 µg/ √ Hz
1960 (µm/sec
2
)/ √ Hz
[1]
Spectral Noise (1 kHz) 100 µg/ √ Hz
980 (µm/sec
2
)/ √ Hz
[1]
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size (Height x Length x Width) 0.4 in x 0.4 in x 0.4 in 10.2 mm x 10.2 mm x 10.2 mm
Weight 0.14 oz 4 gm
[1]
Electrical Connector 8-36 4-Pin 8-36 4-Pin
Electrical Connection Position Side Side
Mounting Adhesive Adhesive
[2]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
NOTES:
[1] Typical.
[2] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 034K10 Cable 10FT Mini 4 Pin To (3) BNC (1)
Model 080A109 Petro Wax (1)
Model 080A90 Quick Bonding Gel (1)
Model ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. (1)
Entered: LK Engineer: GJR Sales: JC Approved: BAM Spec Number:
Date: 3/30/2017 Date: 3/30/2017 Date: 3/30/2017 Date: 3/30/2017
39999
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com