PCB Piezotronics 260A13, Installation And Operating Manual

Page: 13 / 16

Model Number
260A 13
Revision: R
ECN #: 50553
P erfo rm an ce EN G L ISH SI
Sensitivity(± 15 %)(Z Axis) 15 pC/lb 3.37 pC/N [1]
Sensitivity (± 15 %)(X or Y Axis) 32 pC/lb 7.19 pC/N [1]
Measurement Range(Z Axis) 10,000 lb 44.48 kN
Measurement Range (X or Y Axis) 4,000 lb 17.7 kN
Maximum Force(z axis) 11,000 lb 48.93 kN
Maximum Force (x or y axis) 4,400 lb 19.57 kN
Maximum Moment(z axis) 240 ft-lb 325.4 Nm
Maximum Moment (x or y axis) 325 ft-lb 440.7 Nm
Upper Frequency Limit 39,000 Hz 39,000 Hz
Non-Linearity ≤ 1 % FS ≤ 1 % FS [2]
Cross Talk(between x and y axis) ± 3 % ± 3 %
Cross Talk (between (x or y axis) and z axis) ± 5 % ± 5 %
En viro n m en tal
Temperature Range -100 to +350 °F -73 to +177 °C
Electrical
Capacitance(all channels) 70 pF 70 pF [3]
Insulation Resistance(all channels)
≥ 10
12
Ohm ≥ 10
12
Ohm
Output Polarity(in direction of markings) Negative Negative
P h ysical
Preload ≤ 40,000 lb ≤ 178 kN [4]
Stiffness(z axis) 38.8 lb/µin 6.8 kN/µm [3]
Stiffness (x or y axis) 11.4 lb/µin 2.0 kN/µm [3]
Size (Height x Length x Width x Bolt
Diameter x ID x Sensing Surface) 0.790 in x 2.25 in x 2.25 in x 1
in x 1.023 in x 1.800 in
20.07 mm x 57.1 mm x 57.1
mm x 25 mm x 25.98 mm x
45.72 mm
Weight 9.88 oz 280 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector(Quantity, 3) 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
W - Water Resistant Cable
Electrical Connection Position Side Side
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[2]Zero-based, least-squares, straight line method.
[3]Typical.
[4]Preload should be at least 10 times the X and Y operating range used.
Date: 04/17/2020 Date: 04/17/2020 Date: 04/17/2020 Date: 04/17/2020 6231
Entered: LK Engineer: RPF Sales: KK Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
SU P P L IED A C C ESSORIES:
Model 081A71 Mounting Stud (1)
Model 082B06 Anti-Friction Washer (1)
Model 083A11 Pilot Bushing (1)
Model M081A71 Mounting Stud (1)