PCB Piezotronics 1411-02ADB, Installation And Operating Manual

Page: 15 / 16

Model Number
1411-02ADB
FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE
Revision: D
ECN #: 43840
Performance ENGLISH SI
Measurement Range(100 x 10^6 cycles) 100 klb 445 kN [5][6]
Sensitivity(± 10 %)(Rated Output) 2.0 mV/V 2.0 mV/V [7][1]
Non-Linearity ≤ 0.06 % FS ≤ 0.06 % FS
Hysteresis ≤ 0.06 % FS ≤ 0.06 % FS
Non-Repeatability ≤ 0.02 % FS ≤ 0.02 % FS
Eccentric Load Sensitivity ≤ 0.1 %/in ≤ 0.1 %/25.4mm
Resonant Frequency 18 kHz 18 kHz
Side Load Sensitivity ≤ 0.1 %/in ≤ 0.1 %/25.4mm
Creep(in 20 minutes) 0.025 % 0.025 %
Static Error Band ≤ 0.06 % FS ≤ 0.06 % FS [5]
Environmental
Overload Limit 300 klb 1335 kN
Load Limit(Side Force, F
X
or F
Y
) 100 klb 445 kN [3]
Load Limit (Bending Moment, M
X
or M
Y
) 100k lbf-in 11.3k Nm [3]
Load Limit (Axial Torque, M
Z
) 100k lbf-in 11.3k Nm [3]
Temperature Range(Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output(Maximum) ± 0.0008 %Reading/°F ± 0.0018 %Reading/°C [4]
Temperature Effect on Zero Balance(Maximum) ± 0.0008 %FS/°F ± 0.0018 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage(Recommended) 10 VDC 10 VDC [2]
Insulation Resistance ≥ 5k GOhm ≥ 5k GOhm
Zero Balance ≤ 1 % FS ≤ 1 % FS
Output Polarity +Tension +Tension
Physical
Size (Diameter x Height) 11.00 in x 7.00 in 279.40 mm x 177.80 mm [8]
Weight 135 lb 61.3 kg
Mounting Thread 2 3/4 - 8 UN-3B No Metric Equivalent
Sensing Element Strain Gage Strain Gage
Mounting Torque 6000 lbf-in 678 Nm
Deflection at Full Scale Capacity 0.001 in 0.03 mm
Electrical Connector PT02E-10-6P (2) PT02E-10-6P (2)
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
NOTES:
[1]Nominal.
[2]Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3]Singularly applied, i.e. no other extraneous loads.
[4]Over compensated operating temperature range.
[5]FS - Full Scale.
[6]Calibrated in tension and compression.
[7]RO - Rated Output.
[8]See Outline Drawing 51434 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A40 Lifting Plug
Model 084A41 Lifting Plug
Model 084A58 Pre-Tension Stud
Model 084A59 Pre-Tension Stud
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: ltinfo@pcbloadtorque.com
Web site:
http://www.pcbloadtorque.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: AP Engineer: PE Sales: RWM Approved: JSD Spec Number:
Date: 2/17/2015 Date: 2/17/2015 Date: 2/17/2015 Date: 2/17/2015
51822