PCB Piezotronics 102A10, Installation And Operating Manual

Page: 8 / 9

Model Number
102M 295
ICP® PRESSURE SENSOR
Revision: A
ECN #: 50860
P erfo rm an ce EN G L ISH SI
Measurement Range(for ±5V output) 3,500 psi 24,133 kPa [1]
Sensitivity(± 15 %) 1.5 mV/psi 0.217 mV/kPa
Maximum Pressure(Total) 10,000 psi 68,950 kPa
Resolution 0.02 psi 0.14 kPa [2]
Resonant Frequency ≥ 250 kHz ≥ 250 kHz
Rise Time(Reflected) ≤ 2.0 µ sec ≤ 2.0 µ sec
Low Frequency Response(- 5 %) 0.5 Hz 0.5 Hz
Non-Linearity ≤ 1.0 % FS ≤ 1.0 % FS [3]
En viro n m en tal
Acceleration Sensitivity ≤ 0.002 psi/g ≤ 0.0014 kPa/(m/s²)
Temperature Range(Operating) -320 to +212 °F -196 to +100 °C
Temperature Coefficient of Sensitivity ≤ 0.06 %/°F ≤ 0.108 %/°C
Maximum Flash Temperature 3,000 °F 1,649 °C
Maximum Vibration 2,000 g pk 19,613 m/s² pk
Maximum Shock 20,000 g pk 196,133 m/s² pk
Electrical
Discharge Time Constant(at room temp) ≥ 1.0 sec ≥ 1.0 sec
Excitation Voltage 15 to 30 VDC 15 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance < 500 Ohm < 500 Ohm
Output Bias Voltage 3 to 8 VDC 3 to 8 VDC
Electrical Isolation > 10 MOhm > 10 MOhm
P h ysical
Sensing Geometry Compression Compression
Sensing Element Quartz Quartz
Housing Material(probe) 304L/316L Stainless Steel 304L/316L Stainless Steel
Thread Adaptor Material Inconel 718 Inconel 718
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.92 oz 26 gm
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Piezotronics, Inc.
OP TION A L VERSION S
Optional versions have identical specifications and accessories as listed for the standard model except
where noted below. More than one option may be used.
N OTES:
[1]-5V output may be limited by the output bias.
[2]Typical.
[3]Zero-based, least-squares, straight line method.
[4]See PCB Declaration of Conformance PS023 for details.
Date: 07/10/2020 Date: 07/10/2020 Date: 07/10/2020 Date: 07/10/2020 62261
Entered: LK Engineer: NJL Sales: RWM Approved: RPF Spec Number:
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com