PC Partner 35892900 Series Technical Reference Booklet Download Page 3

3

HARDWARE CONFIGURATION

The Micro ATX motherboard is based on the Intel® 82443BX/ZX Chipset. The
chipset is a highly integrated solution enabling a high performance motherboard
and desktop design for the Pentium® II/Pentium® III processor. The motherboard
supports standard DIMM module, 66MHZ and 100MHz(PC-100) DIMM module
or Registered DIMM module. The features on board include Super-I/O, Ultra
DMA33/PCI bus master IDE , AGP 1.0 compliance, PCI 2.1 compliance, USB,
VRM 8.2 compliance,  ECC(BX only),  Micro ATX specification 1.0 compliant,
on-board sound system (optional).
This motherboard is ready for PC99 requirements.

Key Features
Processor

Full support for the Intel

®

 Pentium

®

 II & Intel

®

 Pentium

®

 III, Intel

®

 Celeron

®

and Deschutes

® 

processors using Slot 1 connector.

Slot 1 connector for Intel

®

 Pentium

®

 II & Intel

®

 Pentium

®

 III micro processors.

Support bus speed of 66/100, this includes all Pentium

®

 II & Pentium

®

 III

processors from 233MHz to 550MHz and future processors.

CPU Speed Setting

Jumper setting or no jumper is needed to set for various speed of CPU
(Factory optional).

VRM (Voltage Regulator Modules) on Board

Flexible motherboard design with on-board VRM 8.4, easy to upgrade
with future Intel’s

®

 Future Pentium

®

 II and Pentium

®

 III processors.

Cache

Pentium

®

 II & Pentium

®

 III Processor built-in L2 cache(the TagRAM and

two or four BSRAMs for 256KB or 512KB).

System Memory

A total of two 168-pin DIMM sockets.

Supports Synchronous DRAM at 66/100MHZ.

Memory size up to 512MB.

Supports Symmetrical and Asymmetrical Dram addressing.

Supports single density DIMMs of 1M, 2M, 4M, 8M and 16M depth(x64 or x72).

Supports double density DIMMs of 2M, 4M, 8M, 16M and 32M depth (x64
or 72).

Supports single & double sided DIMMs.

Supports Error Checking and Correction (ECC,BX only) using parity
DRAM modules.

Banks of different DRAM types depths can be mixed.

On-Board I/O

Two PCI fast IDE ports supporting up to 4 ATA, ATA2 and Ultra DMA 33
IDE HDDs, CD-Roms, ZIP drives and LS-120 drives as boot devices.

Hardware Setup

Summary of Contents for 35892900 Series

















Reviews: