PC Partner 35892900 Series Technical Reference Booklet Download Page 12

12

Technical Reference Booklet

ROM PCI/ISA BIOS

CMOS SETUP UTILITY

AWARD SOFTWARE. INC.

STANDARD CMOS SETUP

CPU SPEED SETTING

BIOS FEATURES SETUP

INTEGRATED PERIPHERALS

CHIPSET FEATURES SETUP

SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP

USER PASSWORD

PNP/PCI CONFIGURATION SETUP

IDE HDD AUTO DETECTION

LOAD BIOS DEFAULTS

SAVE & EXIT SETUP

LOAD SETUP DEFAULTS

EXIT WITHOUT SAVING

Esc : Quit

éêèç

: Select Item

F10 : Save & Exit Setup

(Shift) F2

: Change Color

                                   Time. Date. Hard Disk Type

(Note : The figures of BIOS Setup Menu included here only show a typical
case, and may not be exactly the same as the one on your unit.)

Note that a brief description of each highlighted item will appear at the bottom
of the screen.

Standard

This setup page includes all the items of Award™ special

CMOS Setup

standard features.

BIOS Features

This setup page includes all the items of Award™ special

Setup

enhanced features.

Chipset

This setup page includes all the items of chipset special

Features Setup features.

Power

This entry only appears if your system supports Power

Management

Management “Green PC” standards.

Setup

PNP / PCI

This entry appears if your system supports PNP/PCI.

Configuration
Setup

Load  BIOS

The BIOS defaults have been set by the manufacturer and

Defaults

represent  settings which  provide the minimum requirements
for your system to operate.

Load  Setup

The chipset defaults are settings which provide for maximum

Defaults

system performance. While Award has designed the custom
BIOS to maximize performance, the manufacturer has the right
to change these defaults to meet its needs.

CPU Speed

You should refer to your CPU marking and correct setting

Setting

CPU speed.

Summary of Contents for 35892900 Series

















Reviews: