DRAM Bank
Interleave
Enable this item to increase DRAM
memory speed. When enabled, separate
memory banks are set for odd and even
addresses and the next byte of memory
can be accessed while the current byte is
being refreshed.
AGP Comp.
Driving
Use this item to signal driving current on
AGP cards to auto or manual. Some
AGP cards need stronger than normal
driving current in order to operate. We
recommend that you set this item to the
default.
Manual AGP
Comp. Driving
When AGP Driving is set to Manual, use
this item to set the AGP current driving
value.
AGP Mode
This item provides the OnBoard VGA
mode with three options of 1,2, 4
multiplied frequency.
AGP Aperture
Size
This item defines an AGP for the
graphics. Leave this item at the default
value 64MB.
Auto detect
DIMM/PCI
Clock
When this item is enabled, BIOS will
disable the clock signal of free
DIMM/PCI slots.
CLK GEN
Spread Spectrum
Use this item to set the system bus
spread spectrum for the installed
processor.
Hyper Threading
Function
If your P4 CPU is not HT CPU, this item
will be hidden. If your P4 CPU is HT
CPU, BIOS will show this item. You can
set "Disabled" or "Enabled" to control
HT CPU support in O.S. Set “Enabled”
to test HT CPU function.
25
