Mainboard User’s Manual
16
Install the Extension Brackets
The extension brackets are used to connect features on the
mainboard to external connectors that can be attached to the system
chassis. Follow the steps below to install the extension brackets.
Note:
All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
LAN Adapter Extension Bracket
This bracket supports an RJ45 network connector and connects to
the built in LAN header on the mainboard.
1. On the mainboard, locate the LAN header for this bracket.
2. Plug the cable from the bracket into the LAN header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot. Use
the screw that held the blanking plate in place to secure the
extension bracket.
LAN Extension
Bracket
LAN Header
1
Summary of Contents for M756T
Page 4: ...Mainboard User s Manual IV...