1: Introduction
15
Install the Mainboard
Install the mainboard in a system chassis (case). The board is a
micro-ATX size mainboard with a twin-tier of I/O ports. You can
install this mainboard in any ATX case. Special micro-ATX cases
are also available with a reduced number of expansion slot bays
and a smaller power supply unit. Ensure that your case has an I/O
cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
Connect the power connector from the power supply to the
ATX
Power connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
FAN2
fan power connector on the
mainboard.
Connect the case switches and indicator LEDs to the
J8
switch and
LED connector header. See the illustration below for a guide to the
J8 connector pin assignments.
22
21
Power LED
Pins 2-4-6
Speaker
Pins 1-3-5-7
Keylock
Pins 8-10
HDD LED
Pins 15-16
2
1
Reset Switch
Pins 17-18
Power Button/Suspend
Switch Pins 21-22
ATX Power
J8
FAN2
ACPI LED
Pins 19-20
Summary of Contents for M756T
Page 4: ...Mainboard User s Manual IV...