Chapter 1
Introduction
This mainboard has a
slot-1
processor socket for an
Intel
processor cartridge
, and it also has a
socket-370
for an
Intel
PPGA (Plastic Pin Grid Array) Celeron
processor. You can
install either one of these processors according to the power and
performance requirements that you need from your system.
Note
that you cannot install two processors on this mainboard.
Slot-1 processors include the
SEPP (Single Edge Processor
Package) Celeron, the Pentium-II, and the Pentium-III.
Clock
rates run as high as
600 MHz
. Socket-370 processors are the
PPGA Celeron
which runs at clock rates up to
533 MHz
. The
mainboard supports a system bus of
66 MHz
or
100 MHz
.
The mainboard uses the BXcel chipset which is highly integrated
and includes a built-in
PCI 3D Sound System
. A
V.90 Fax/
Modem DAA module
is also shipped with the mainboard. In
addition, the mainboard has a full set of
I/O Ports
including two
serial ports, a parallel port, one PS/2 port and two USB ports.
This mainboard has all the features you need to develop a powerful
multimedia workstation with built-in communications. The board
is
baby-AT sized
and has power connectors for
ATX
and
AT
power supply units.
Summary of Contents for M726MRT
Page 48: ......
