PC Chips M598LMR User Manual Download Page 33

Page: 33 / 49

Advanced Setup Page

Use this page to set more advanced information about your system.
Take some care with this page. Making changes can affect the
operation of your computer.

Trend ChipAway
Virus

This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
built-in virus protection.

Share Memory
Size

This item lets you allocate a portion of the main
memory for use by the onboard VGA system.
Leave this at the default value 8 MB

Boot Device

Use these two items to determine the order and
priority that your computer follows to load an
operating system at start-up time.

Try Other Boot
Devices

If you enable this item, the system will also
search for other boot devices if it fails to find an
operating system from the first two locations.

S.M.A.R.T. for
Hard Disks

Enable this item if your hard disk(s) supports
SMART (Self-Monitoring, Analysis and Reporting
Technology).

BootUp Num-
Lock

This items determines if the Num Lock key is
active or inactive at system start-up time.

Summary of Contents for M598LMR


















































Search results

Summary of Contents for M598LMR

Reviews:

Related manuals for M598LMR

Brands by name

Popular brands

PC Chips M598LMR, User Manual

Search results

Summary of Contents for M598LMR

Reviews:

Related manuals for M598LMR

Brands by name

Popular brands