pbq ATMO-SFERA, Installation, Use And Maintenance Manual, Page: 19 / 28

18
INSTALLATION, USE AND MAINTENANCE GUIDE
FIRST IGNITION
When using the grills for the first time, it is recommended to heat it, keep it very hot
and with the lid closed, for at least 60 minutes. During the first ignition the appliance
will give off a smell of paint. These odors are annoying but they are not harmful.
ONLY FOR PBQ-ONE VERSION
Before igniting, check the opening of the lower
ash pan. The lower cup must remain open
throughout operation.
Pull down to open.
IGNITION
Ignition operations:
• Open the lid and rotate / remove the cast iron cooking plate to have the space to
extract the flame-cutting plate and the burner. Use the supplied tool and gloves.
• After making sure that the burner is clean, pour the pellets into the tank up to the
level indicated in the image.
• Place the burner back into the appliance.
• Flush abundantly the top layer of pellets with the vegetable gel in a spiral movement.
• Check that the burner is correctly positioned in its seat.
• Start the flame with the long neck gas igniter supplied.
• Wait for the flame to invest the entire surface of the burner and close it again with the
flame-cutting plate.