ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
ООО «ТЛК Трейд», Санкт-Петербург
+7 812 64 99 888
Audio Settings
Audio Format: set the audio compression format MPEG-1 Layer II or MPEG2 AAC-LC. (MPEG4 AAC-LC
can be selected on DXP-5410EC series only)
Audio Bit Rate: set the audio bitrate.
Audio Channel Mode: set the audio in stereo or mono. NOTE: only Left audio channel will be encoded
when Mono mode is on.
Audio Level: set the gain of output volume.
Audio SDI EMB: select the group of embedded audio from input SDI signal (the menu is displayed on DXP-
5410/5411EC-S only).
Encoder Bit Rate: set the output bit rate of the current encoder. Encoder bit rate must greater than the sum
of video bit rate + audio bit rate + PSI (150Kbps) + buffering (100Kbps) + encoder error (150Kbps), valid
range from 300 to 99999Kb/s
Advanced Settings
PMT PID: set PMT PID, valid range from 32 to 8190 decimal
Video PID: set Video PID, valid range from 32 to 8190 decimal
Audio PID: set audio PID, valid range from 32 to 8190 decimal
PCR PID: set PCR PID, valid range from 32 to 8190 decimal
Service PID: set Service PID, valid from 32 to 8190 decimal
Service Name: set the service name for the encoded channel. The length should be less than 24
characters.
Scale: Enable or Disable the output video resolution rescaling. The following two parameters have to be set
manually if the Scale is enabled.
Scale Vertical: set the resolution in vertical