manualshive.com logo in svg

Payne INDUCED COMBUSTION GAS FURNACE, Owner'S Manual

Share
Download
Payne INDUCED COMBUSTION GAS FURNACE Owner'S Manual Download Page 8

8

NOTE TO EQUIPMENT OWNER:

For your convenience, please record the model and serial numbers of your new equipment in the spaces

provided. This information, along with the installation data and dealer contact information will be helpful

should your system require maintenance or service.

FURNACE

Model # _____________________________________
Serial # ______________________________________

AIR CONDITIONER OR HEAT PUMP

Model # _____________________________________
Serial # _____________________________________

INDOOR COIL (Furnace Coil or Fan Coil)

Model # _____________________________________
Serial # _____________________________________

INSTALLATION INFORMATION:

Date Installed ________________________________

DEALERSHIP CONTACT INFORMATION:

Company Name_______________________________
Address______________________________________
_____________________________________________
Phone Number _______________________________
Technician Name _____________________________
_____________________________________________
_____________________________________________

NOTE TO INSTALLER:

This manual must be left with the equipment owner.

E

2008 Payne Heating & Cooling Systems

D

7310 W. Morris St.

D

Indianapolis, IN 46231

Printed in U.S.A.

Edition Date: 12/08

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

Catalog No: OG---PG8M---05

Replaces: OG--- PG8M--- 04

Summary of Contents for INDUCED COMBUSTION GAS FURNACE









Reviews:

No comments

Brands by name

Popular brands

Load more brands