Paxar Monarch Sierra Sport 2 9460, Operator'S Handbook Manual

Page: 19 / 38

Loading Supplies 2-5
The supply should unwind as shown
with the loose end of the supply
feeding through the exit chute.
4. Pull out enough supply to lay across the exit chute
and raise the supply door back to the upright
position (as shown below).
5. Remove a couple of labels from the liner. Feed
the supply under the peel bar.
The peel bar should be open. If not,
push up on the release buttons
located on both sides of the printer.
Release
Button
Exit Chute
Peel Bar