Paxar Monarch 9850, Operator'S Handbook Manual, Page: 35 / 108

The high energy setting is lost when you turn
off the printer.
H i g h E n e r g y R i b b o n L i m i t a t i o n s
When using the high energy ribbon option:
u Use a print speed of 2.5IPS (inches per second).
u Printhead warranty is reduced to 100,000 inches.
u Serial bar codes cannot be printed.
u Do not use peel mode.
u No more than 20% of the supply should have print (black
coverage).
CAUTION
The high energy ribbon may break or stick to the
supply when more than 20% of the supply
contains print.
u Only white high energy supply should be used for bar code
printing.
u Reverse fonts cannot be used.
u A non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.
u Do not print horizontal lines or bars.
u Graphics are limited.
Loading Ribbon 3-5