Paxar 9856, Operator'S Handbook Manual

Page: 13 / 51

Loading Supplies 2-1
L O A D I N G S U P P L I E S
The printer accepts a wide range of supplies. You can use roll,
fan-fold, or die cut continuous supply for thermal transfer or thermal direct.
Using thermal direct supply with a ribbon produces unacceptable print
quality.
L o a d i n g N o n - P e e l a n d F a n - F o l d S u p p l y
To load a roll of labels or fan-fold labels:
1.
Open the side access cover.
2.
Slide a roll of labels onto the supply hub assembly and position it
against the inner guide. If using
fan-fold supply, slide an empty supply
core onto the supply hub assembly. Install the fan-fold supply from the
rear or the bottom of the printer.
3. Lift and rotate the printhead latch wing counterclockwise one half turn to
unlock the printhead. Release the latch and raise the printhead to an
upright position
2
Printhead
Printhead
Latch Wing