PAX E800 Reference Manual Download Page 60

Page: 60 / 63

Customer Support

[email protected]

(877) 859-0099

www.pax.us

20190426 v1.0

E800 REFERENCE GUIDE

On the Q20, from the TM Main Menu, select System Config. Enter the password. Press Enter. Select

Media > Brightness. Press the Up Arrow to brighten the display or the Down Arrow to darken the

display.

Adjusting Q20 Brightness Level

Note:

The Q20 default setting is “6”. The brightest setting available is “10”. The dimmest setting is “1”.

19.15

Does the E800 have a camera?

Yes, the E800 includes a 5-megapixel auto zoom read camera that can read 1D and 2D barcodes.

19.16

What is the screen resolution? Can I change the screen resolution?

The screen resolution for the 15.6-inch clerk-facing E800 screen is 1920 x 1080 pixels. The screen

resolution for the 4.3” Q20 screen is 480 x 272 pixels. The screen resolution for the E800 and the Q20

are fixed and cannot be changed.

19.17

How do I change the volume on an E800? Where are the volume control buttons?

Under Settings, select Device > Sound & notification. Click the pull-down menu to set the volume for

media, alarms, and notifications. There are no external volume control buttons on the E800.

Summary of Contents for E800
































































Search results

Summary of Contents for E800

Reviews:

Related manuals for E800

Brands by name

Popular brands

PAX E800, Reference Manual

Search results

Summary of Contents for E800

Reviews:

Related manuals for E800

Brands by name

Popular brands