PAX D220 Quick Setup Guide
PAX Technology®
7
20180801 v1.1
(877) 859-0099
Use the Right and Left Arrows on the screen
to review and select the desired Wi-Fi network.
Select the Password option, input the case-
sensitive password and press the Enter button.
Wi-Fi Static IP Setup
(SSID Visible)
If you are required to setup a Wi-Fi connection with
a static IP and you know that the SSID is visible,
perform the steps in this section.
Before you begin configuration, ensure that you
have the correct network information; IP Address,
Subnet mask, Gateway ID, passwords, etc.
If you are required to setup a Wi-Fi connection with
a static IP and you know that the SSID is NOT
visible, perform the Steps in Section 8.1.2 Wi-Fi
Static IP Setup
(SSID Not Visible).
Perform Steps 1 through 6 as shown in Section
8.1 D220 Basic Wi-Fi Setup.
After selecting the Wi-Fi parameters option
(Step 6), use the Right Arrow on the screen,
navigate to and select the Switch Router
option.
The terminal searches for Wi-Fi networks.
Use the Right and Left Arrows on the screen to
review and select the desired Wi-Fi network.
Select the Password option, input the case-
sensitive password and press the Enter button.
Select the DHCP Type option and select Static.
Select the IP Address option, input the IP
Address, and press the “Enter” button.