3
Using your New Automatic Feeder
Assemble Unit
1. Attach the bowl to the designated notches underneath the
main body.
2. Plug a USB cord into the USB port at the rear of the main
body, and attach the other end to a power adapter.
If you do not wish to use the power adapter, you may
install batteries.
Install Batteries
1. Open the battery compartment at the bottom of the
feeder body.
2. Install three alkaline D batteries. Make sure battery
wrappings are not torn and that you match the positive
and negative poles with the markings in the compartment.
3. Make sure the power switch is in the on position (“I”).
Check Motor Functions
1. Press and hold the MANUAL button on the feeder for three
(3) seconds. The rotor should rotate and release
one portion.
2. Repeat this process two more times. If it completes
successfully, then the motor functions are working with
no issues.
Control Panel
MEAL 1 button
ON/OFF
button
AMOUNT
button
HOUR
button
MINUTE
button
MANUAL
button
LED display
MANUAL
button
TIMER button
PLAY button
LOW BATTERY
indicator
MEAL 2 button
MEAL 3 button
MEAL 4 button
HOLD
FOR
