Congratulations on purchasing this Durawood Essentials/Sunrise Chair! You’re going to love the quality, durability and
simple assembly
—
plus the full Residential Lifetime Warranty.
QUESTIONS REGARDING THIS PRODUCT?
Call our customer-
service line toll-free at (800) 643-3522.
STEP 1.
Align
chair
back
holes with
chair seat holes.
(
FIGURE 1
).
chair back
HARDWARE PACK
Before beginning assembly, make sure you have all parts. Note that
not all parts pictured are to scale.
ASSEMBLY
14 - 2" Barrel Bolt
REQUIRED TOOL
(NOT PROVIDED)
•
Standard Phillips Head Screwdriver
CHAIR PARTS
STEP 2.
Take apart one
Barrel Bolt Assembly,
inserting the Barrel Bolt
into the lined-up holes
(
FIGURE 2
), if the Barrel Bolt
doesn't go in easily, push
it all the way in using the
Allen Wrench.
Line up the other set of
holes, repeating this step
with a second Barrel Bolt
Assembly.
HOLES
USING BARREL BOLTS
EXTREMELY
IMPORTANT:
Use
ONLY
a Standard
Phillips Head
Screwdriver to
tighten Barrel
Bolt Assemblies;
using a drill can
strip the Barrel
Bolt head,
marring the
appearance of
your chair.
then
To correctly thread Barrel Bolts to Bolt Fasteners:
Fit the Fastener over the bottom of the Bolt,
turning the Fastener at first counterclockwise,
until you hear a slight click, then begin
tightening clockwise as you normally would.
HOLES
FIGURE 1
FIGURE 2
ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
chair seat
left arm/
leg
assembly
right arm/
leg
assembly
Durawood Essentials/
Sunrise Chair
WITH ARMS
bottom
chair
frame
Assemblies
6 - 1" Pegs
1 - Allen Wrench
Hardware pack
weight:
8.31
oz
x6
Your Durawood Furniture comes with several
pegs to increase sturdiness. Wherever you
find a peg hole, insert peg. You may need to
use a small mallet to tap the plug into place.
