#6017 / 051915
STEP 3.
Align
bottom
chair frame
with rear legs,
making sure peg and
peg holes align.
(Figure
3)
Take apart one Barrel
Bolt Assembly, inserting
the Barrel Bolt into a set
of lined-up holes, if the
Barrel Bolt doesn't go in
easily, push it all the way
in using the Allen Wrench.
Fit Bolt Fastener over the
bottom of the Barrel Bolt
and tighten using the Allen
Wrench and a Standard
Phillips Head Screwdriver.
Do not over tighten.
Repeat for opposite side.
FIGURE 3
RESIDENTIAL WARRANTY
| This quality product includes a
FULL LIFETIME WARRANTY
for
RESIDENTIAL CUSTOMERS
. If damage
occurs due to any splintering, rotting, cracking or peeling, within normal or acceptable use, The Hammock Source will replace
this furniture, at no charge to you. Note that an original sales receipt must accompany any returned product, along with a Return
Authorization Number from The Hammock Source customer service; call toll-free at (800) 643-3522.
CONTRACTOR WARRANTY
|
CONTRACTORS
receive a
FULL 7-YEAR WARRANTY
. Follow the same steps outlined above.
PEG
PEG
STEP 4.
Turn chair with right side facing up. Align both peg
holes in the arm/leg assembly with pegs on side of chair.
(You may need to wiggle the chair seat to allow for proper
seeding.) Attach barrel bolt assembly as previously instructed
for each of the 3 holes on the side of the chair. Do not over
tighten. Flip chair over to left side and repeat with left leg.
STEP 5.
Tighten all Barrel Bolt Assemblies securely.
FIGURE 4
