background image

Assembly step

Warning:pls read manual carefully before assembly,to avoid adverse consequences.

Assembly on the prime bracket-upper part

Insert ⑤ height adjustment pipe to the top 
of ① prime bracket,adjust the height and 
fasten with Ⓔ rotary switch tight.

Assembly prime bracket-lower half

Insert ④connector into the top part of
②prime bracket-down,fasten by Ⓒwasher
Ⓐshort hex screw and small hex wrench.
Insert ③stand bracket into the end part 
of ②prime bracket-down,fasten by Ⓒwasher,
Ⓐshort hex screw and small hex wrench.
Turn counter-clockwise the Ⓖstand to the
③stand bracket.

Assembled figure

Assembly of suction cups 

Put the Ⓓsuction cups
on the top of ⑤ height 
andjustment pipe

Assembly of the upper 
and lower half part 
of prime bracket

Combine ①prime bracket-
upper part and ②prime 

bracket-lower half part 

with Ⓒwasher,Ⓐshort hex 
screw and small hex 
wrench in ① ②

Assembly of shelf board

Fasten ⑥shelf board to ⑧bracket by 4pcs long 
hex screws,⑦shelf board to ⑧bracket by 2pcs 
long hex screws.

Assembly of hammock

Insert pipe into 2 sides of ⑨hammock,
fasten by long hex screw with ⑩bracket. 
4 points are the same.

Fix to the top ceiling

Pull up the ⑤ height adjustment pipe of 
temporarily fixed like picture 1
Clockwise rotating the Ⓓ top adjustment 

switch to reach the top ceiling,at the 

same time clockwise rotating Ⓔ rotary 

switch,make 

 sure fasten tight like picture 2

Assembly shelf board to prime bracket

Hang the shelf boards 
and hammock onto pr

ime bracket, adjust 

according to your
 preferences.

Fasten method of shelf board

  Hang shelf board onto the bracket pipe,

  fasten by Ⓕrotary knob.

 

Reviews: