![background image](http://html.mh-extra.com/html/paw/heatbloc-mc-41-dn-25/heatbloc-mc-41-dn-25_installation-and-operation-instructions-manual_764046018.webp)
5 Assembly and installation [specialist]
18
9945x1051x-mub-en – V03
2018/11
I) Set the control type
1.
You are in the menu
Settings
.
2.
Select
Control mode
and confirm by pressing OK.
3.
Select
Constant curve
and confirm by pressing OK.
4.
Press the Home button to return to the main menu.
II) Set the nominal value
1.
You are in the menu
Settings
.
2.
Select
Nominal value
and confirm by pressing OK.
3.
Press OK.
4.
Set
100%
as nominal value and confirm by pressing OK.
5.
Press the Home button to return to the main menu.
III) Set the analogue input
1.
You are in the menu
Assist
.
2.
Select
Analogue input setup
and confirm by pressing OK.
3.
Continue to scroll.
4.
Select
External nominal value adjustment
and continue to scroll.
5.
Select
0-10 V
as signal type and continue to scroll.
6.
Check the displayed summary and confirm by pressing OK.
IV) Set the setpoint influence
6.
You are in the menu
Settings
.
7.
Select
Nominal value adjustment
and confirm by pressing OK.
8.
Select
External nominal value function
and confirm by pressing OK.
9.
Select
Linear to MIN
and confirm by pressing OK.
10.
Press the Home button to return to the main menu.