2 Dismounting of the insulation [specialist]
11
993xx73x-inf-ml – V01
2017/08
2
Dismounting of the insulation [specialist]
The dismounting of the insulation of the HeatBloC K33 must be carried out in a specific
sequence in order to avoid damages of the insulation.
Attention: The pump plug can only be removed if the lower insulating shell of the HeatBloC
has been taken off before! Otherwise there is a risk of causing damage to the insulation.
1.
Remove the insulating front shell
of the distribution manifold.
2.
Push the insulating back shell
backwards as much as possible.
3.
Carefully press the insulation element into
the opening until it is placed behind the
thermostatic head.
