![background image](http://html.mh-extra.com/html/paw/705610/705610_assembly-instructions-manual_764015005.webp)
3 Montage des Motors
2010/06
9970561x – V03
5
These instructions describe the assembly of the accessory kit for Viessmann actuators to a
PAW mixing valve. These instructions refer to the following articles:
705610
for PAW mixing
valves with short
spindle
(as of 07/2010)
70561VIE2
for PAW mixing
valves with long
spindle
(until 10/2010)
For the assembly of the accessory kit you need the following tools:
•
Phillips screwdriver P2
•
Socket wrench 8 mm, 10 mm and 13 mm
Assembly instructions
Accessory kit for Viessmann actuator
for assembly to PAW mixing valves
Notice: material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM,
whereby the sealant properties are lost. We do not assume liability nor
provide warranty for damage to property resulting from sealants damaged
in this way.
It is imperative to avoid that EPDM gets in contact with substances
containing mineral oils. Use a lubricant based on silicone or polyalkylene
and free of mineral oils such as Unisilikon L250L and Syntheso Glep 1 of
the Klüber company or a silicone spray.