![background image](http://html.mh-extra.com/html/paw/6095436/6095436_installation-and-operation-instruction-manual_764030011.webp)
3 Assembly and installation [specialist]
2017/05
99609x4x5-mub-en – V05
11
3.1
Controller connection
WARNING
Risk to life and limb due to electric shock!
Prior to commencing electrical work on the controller, pull the mains plug!
Only after completing all installation work, plug the mains plug of the
controller into a socket.
This avoids an unintentional start of the motors.
Wiring plan SolexMidi / SolexMaxi
Wiring plan (881) for domestic hot water
systems and heating systems
Wiring plan (882)
for heating systems
Observe the separate instructions regarding the controller SC5.14!
1.
Connect the temperature sensors to the controller:
Collector sensor S1
Storage tank bottom: S2
Integrated: S3, S9, (FlowRotor)
Collector sensor S1
Storage tank 1, bottom: S2
Storage tank 2 bottom: S4
(addit. required, item no. E13180)
Integrated: S3, S9, (FlowRotor)
2.
Tighten all union nuts and screw connections.
The assembly of the transfer station is now completed and
you can put the station into operation.
dV
dV