2
the pouch into laminator through Laminator front entry.
HOT LAMINATION
If you press the switch button to "Hot" position, you would have to wait for
about 6 minutes until the Green Ready LED turns on , and then put the
paper into pouch, and insert the pouch into laminator through Lamination
Entry.
Note: During lamination, the “Ready LED” may go out, as heat is
absorbed by the laminating pouch. This is normal. Do not need to stop
and wait for “Ready LED” to turn on light again. Please continue to
laminate your document or photo !
CLEAR THE JAMMED POUCH
This laminator is designed with a manual release device to clear the jammed
pouch. When a misfeed or jam occurs, press down "ABS " button and pull
out the jammed pouch..
MAINTENANCE AND WARNING
1. To clean or move around, make sure that this laminator is turned off.
2.
Do not laminate dirty pouches, clean it before lamination.
3.
Do not use this laminator in damp conditions.
4.
Do not laminate anything that is more than 0.6mm thickness for best seal.
5.
Do not laminate heat sensitive paper.
6.
Do not insert open side of the laminating pouch into Lamination Entry, it
may lead to jamming or curling inside. Enter the pouch with the closed side
first.
WARRANTY
This product comes with two years limited warranty.
