18
Installing the Sprayer
Filter Unit Assembly and Installation (DS106)
1. Assemble components from filter unit package as shown on
page 12. Use Teflon tape and/or thread sealant paste to seal
threaded connections. Do not over-tighten plastic fittings or
damage will occur.
2. Secure the filter unit to a solid surface using the supplied
loom clamps and self-drilling hex head screws.
3. Connect the pump outlet to the filter assembly inlet with
the required length of 1/2” hose and secure the hose with
hose clamps. Reference plumbing schematic on page 14.
Trailer/Drive Axle Nozzle Assembly and Mounting (DS101)
1. Assemble components from nozzle unit package as
shown on page 8. Use Teflon tape and/or thread sealant
paste to seal threaded connections. Do not over-tighten
plastic fittings or damage will occur.
2. Nozzle should be approximately 13” from the tire and
centered between the dual wheels or centered on the
single tire to ensure complete and thorough coverage of
the tire(s). Use the supplied universal mounting bracket
to ensure that you can achieve the desired coverage.
Nozzles Mounted with Bracket
Nozzles Mounted without Bracket
Summary of Contents for DS-15
Page 2: ......
Page 23: ...23 Notes...
