Slide the cuffs up against the fuselage and use tape to hold them in place while the
glue sets. Don’t set the cuffs too tight against the fuselage, as the gear needs some
room to flex without cracking the cuffs.
Chapter 4
Motor and ESC Installation
Your firewall come pre drilled and ready to use with 4020 size motors. We recommend
the PAU 4020 540KV motor (made by Scorpion) along with the Castle Talon 90 amp
ESC.
Install motor onto the firewall using supplied 3mm screws.
Mount ESC on the side of the firewall to ensure ESC gets proper airflow and cooling.
Make sure to test motor direction
